Big Systems Mimaki CF2 Series Cutters

The CF2 Series flat bed cutting plotter capable of cutting various kinds of media with high accuracy without a frame. Out of a total of 30 kinds of our rich line-up, you may select the one best suited to your media needs. By cutting the printed media, you may produce high value-added products on demand required. Begin multi-type small-lot production of with unprecedented high quality.

By adjusting the depth of the cutter blade, you can half-cut composite, laminated material (etc). As two tools can be used, you can perform different types of half-cutting or diecutting without changing the tools.

With the adoption of a high performance color photo sensor, the round register marks printed on the media are read and the position of the origin, inclination of coordinate and distance are corrected.
This enables the operator to perform cutting at the precise position. Further, the sensor recognizes the difference of "color of media" and "color of round register marks", and enables the cutter to perform cuts accurately, while being tailored to the printed material without being influenced by the color of the media. A light pointer that is used as marker when setting the media is provided as standard device and facilitates position adjustment with round register marks.

With the aid of a work-guide installed to the directions of X and Y, the positioning of the media is smooth and working efficiency has been improved. It is also possible to remove the work-guide depending on the media size.

		CF2-0912**	CF2-1215**	CF2-1218**
Effective plotting area	X (Sensor model)	1,170mm(46.1")	1,470mm(57.9")	1,770mm(69.7")
	X (No sensor model)	1,200mm(47.2")	1,500mm(59.1")	1,800mm(70.9")
	Y	900mm(35.4")	1,200mm(47.2")
Motorization		X,Y,Z,θ 4 axes DC software servo
Maximum plotting speed		50cm(19.7") / s
Maximum acceleration		0.5G
Mechanical resolution		X:0.00234mm(0.00009") Y:0.003125mm(0.0001") θ:0.05625
Command resolution		0.025mm(0.001") / 0.01mm(0.0004") (changeable from operation panel)
Static accuracy *1	Repetition accuracy	±0.1mm(0.004")
	Distance accuracy	±0.1mm(0.004") or ±0.1% whichever is greater
	Origin repetition accuracy	±0.1mm(0.004")
Maximum thickness of set work		T / TD:25mm(1") RT / RC:20mm(0.8")
Work fixation		Air suction by a blower
Receiver buffer size		1MB
Command		MGL-IIc3(Support MGL-IIc) *2
Interface		RS-232C
Dimension	Width	1,760mm(69.3") or less	2060mm(81.1") or less	2360mm(92.9") or less
	Depth	1,600mm(63.0") or less	1900mm(74.8") or less
	Height	1,100mm(43.3") or less
Weight		140kg(308lbs)	165kg(364lbs)	180kg(397lbs)
Operation environment		Temperaturet : 5-40ºC Humidityt : 35-75%(Rh)No condensation
Power requirement		Main Unitt : 50/60Hz AC100/120/220/240V(tap changing) Blowert : Stated separately
Power consumption		Main Unit : 300VA Blowert : Stated separately


*1	Accuracy written with a pen where the load is almost non-existent. Guaranteed temperature range is 20 to 25 ºC.
*2	A command based on HP-GL.

Materials that can be processed

	Possible to cut with standard accessories
	Possible to cut with the use of optional items

	T	TF	RT	TD	RC
Corrugated fiberboard(E to B corrugation)*
Corrugated fiberboard(AB corrugation)*
Coated board for packaging*
Vinyl chloride for clear package*
Plastic corrugated fiberboard
Vinyl chloride sheet for signboard
Soft vinyl chloride(0.5 to 10mm)
Reflecting sheet
Sand-blast rubber
Industrial sheet rubber(3mm or less)
Industrial sheet rubber(0.5 to 10 mm)
Pattern Happort
Teflon(1.0 to 5.0mm)
Resin belt. (5.0mm or less)
Various foam(20mm or less)